Serial Number | 85572520 |
Word Mark | PLASTI-FAB |
Filing Date | Saturday, March 17, 2012 |
Status | 800 - REGISTERED AND RENEWED |
Status Date | Thursday, September 28, 2023 |
Registration Number | 4311880 |
Registration Date | Tuesday, April 2, 2013 |
Mark Drawing | 4000 - Illustration: Drawing with word(s) / letter(s) / number(s) in Block form |
Published for Opposition Date | Tuesday, January 15, 2013 |
Goods and Services | Educational services, namely, providing instructions and conducting workshops and seminars on energy-efficient commercial and residential buildings, expanded polystyrene (EPS) insulating building products, structural insulated panels and building panels, insulating concrete forms, timber frame building construction, and buildings made using the aforementioned components |
Goods and Services | (Based on 44(e)) Building construction material, namely, insulating concrete forms; (Based on Use) Prefabricated non-metal energy-efficient commercial and residential buildings; structural timber frames for buildings; lightweight fill material, namely, geotextiles for soil stabilization, landscaping, road embankments and a compressible inclusion against foundation walls; compressible fill material, namely, geotextiles for reducing potential forces on structures in the event of soil expansion, used under concrete grade beams, under structural floor slabs and against foundation walls, and used to support expected construction live loads and the weight of the structural slab; non-metal flotation billets used in building floating foundation platforms, docks, marinas and floating homes; expanded polystyrene (EPS) for use in architectural designs, namely, decorative details and mouldings; expanded polystyrene (EPS) drainage materials, namely, insulation boards made of expanded polystyrene (EPS) used to facilitate drainage of water relating to foundation walls; lumber; Lightweight fill material used for dirt replacement, filling voids, and structural applications, namely, foam blocks composed of expanded polystyrene (EPS) for use in soil stabilization, landscaping, road embankments, and as a compressible inclusion against foundation walls; Compressible fill material used for dirt replacement, filling voids, and structural applications, namely, foam blocks composed of expanded polystyrene (EPS) for reducing potential forces on structures in the event of soil expansion, used under concrete grade beams, under structural floor slabs and against foundation walls, and used to support expected construction live loads and the weight of the structural slab |
Goods and Services | (Based on 44(e)) Insulating building products, namely, expanded polystyrene (EPS) insulation for commercial, residential, and geotechnical applications in the construction industry, namely, expanded polystyrene (EPS) insulation for roofs, walls, floors, foundations of buildings, and ice rink buildings; expanded polystyrene (EPS) insulation for use in the building of recreational vehicles, trucks, vessels, boats, railway cars, hot tubs, ice rinks, refrigerators, utility lines, and pipes; foam insulation for use in building and construction; structural insulated panels, namely, insulated panels for building walls and floors; insulating concrete forms for buildings composed of expanded polystyrene (EPS); Structural insulating panels for placement on edifices; energy-efficient building envelope systems comprised of foam insulation for use in building and construction, structural insulated construction panels for building walls and roofs, and insulating concrete forms used to build foundations and walls, all of the aforementioned sold as a unit; (Based on Use) Expanded polystyrene (EPS) foam for use in constructing foam props, custom signage, and movie and stage sets |
Goods and Services | [ Providing consulting services concerning building construction and the use of construction and building materials, namely, structural insulating panels, insulating concrete forms, timber frames for buildings, and insulating building products made of expanded polystyrene (EPS), for commercial, residential, and geotechnical applications; Installation of structural insulating panels, insulating concrete forms, timber frames for buildings, and insulated building products made of expanded polystyrene (EPS) for commercial, residential, and geotechnical applications; construction of energy-efficient commercial and residential buildings; ] providing consulting services in the field of energy-efficient commercial and residential building construction |
Pseudo Mark | PLASTIC-FAB |
Indication of Colors claimed | Color is not claimed as a feature of the mark. |
Goods and Services | Providing consulting services related to the design of energy-efficient buildings, insulated concrete forms and building systems or structures made from combinations of structural insulated panels, building panels and insulated concrete forms; custom design of structural insulated panels and building panels; custom design of buildings using structural insulated panels and building panels; custom design of insulated concrete forms and building systems or structures made from combinations of structural insulated panels, building panels and insulated concrete forms; custom design of buildings using insulated concrete forms or building systems or structures made from combinations of structural insulated panels, building panels and insulated concrete forms; providing consulting services related to the design of structural insulated panels and building panels; design of expanded polystyrene (EPS) insulating building products, structural insulated panels and building panels, insulating concrete forms, and timber frames for buildings for others; Providing consulting services concerning construction drafting; providing consulting services in the field of energy measurement to improve energy-efficiency of commercial and residential buildings |
International Class | 017 - Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal. |
US Class Codes | 001, 005, 012, 013, 035, 050 |
Class Status Code | 6 - Active |
Class Status Date | Tuesday, March 27, 2012 |
Primary Code | 017 |
First Use Anywhere Date | Thursday, November 30, 1972 |
First Use In Commerce Date | Saturday, November 30, 1991 |
International Class | 019 - Building materials (non-metallic); nonmetallic rigid pipes for building; asphalt, pitch and bitumen; nonmetallic transportable buildings; monuments, not of metal. |
US Class Codes | 001, 012, 033, 050 |
Class Status Code | 6 - Active |
Class Status Date | Tuesday, March 27, 2012 |
Primary Code | 019 |
First Use Anywhere Date | Thursday, November 30, 1972 |
First Use In Commerce Date | Saturday, November 30, 1991 |
International Class | 037 - Building construction; repair; installation services. |
US Class Codes | 100, 103, 106 |
Class Status Code | 6 - Active |
Class Status Date | Tuesday, March 27, 2012 |
Primary Code | 037 |
First Use Anywhere Date | Thursday, November 30, 1972 |
First Use In Commerce Date | Saturday, November 30, 1991 |
International Class | 041 - Education; providing of training; entertainment; sporting and cultural activities. |
US Class Codes | 100, 101, 107 |
Class Status Code | 6 - Active |
Class Status Date | Tuesday, March 27, 2012 |
Primary Code | 041 |
First Use Anywhere Date | Thursday, November 30, 1972 |
First Use In Commerce Date | Saturday, November 30, 1991 |
International Class | 042 - Scientific and technological services and research and design relating thereto; industrial analysis and research services; design and development of computer hardware and software. |
US Class Codes | 100, 101 |
Class Status Code | 6 - Active |
Class Status Date | Tuesday, March 27, 2012 |
Primary Code | 042 |
First Use Anywhere Date | Thursday, November 30, 1972 |
First Use In Commerce Date | Saturday, November 30, 1991 |
Party Name | PLASTI-FAB LTD. |
Party Type | 30 - Original Registrant |
Legal Entity Type | 03 - Corporation |
Address | Calgary, Alberta T1Y7K7 CA |
Party Name | PLASTI-FAB LTD. |
Party Type | 20 - Owner at Publication |
Legal Entity Type | 03 - Corporation |
Address | Calgary, AB T1Y7H9 CA |
Party Name | PLASTI-FAB LTD. |
Party Type | 10 - Original Applicant |
Legal Entity Type | 03 - Corporation |
Address | Calgary, AB T1Y7H9 CA |
Event Date | Event Description |
Thursday, September 28, 2023 | NOTICE OF ACCEPTANCE OF SEC. 8 & 9 - E-MAILED |
Thursday, September 28, 2023 | REGISTERED AND RENEWED (FIRST RENEWAL - 10 YRS) |
Thursday, September 28, 2023 | REGISTERED - SEC. 8 (10-YR) ACCEPTED/SEC. 9 GRANTED |
Thursday, September 28, 2023 | CASE ASSIGNED TO POST REGISTRATION PARALEGAL |
Wednesday, August 30, 2023 | ASSIGNMENT OF OWNERSHIP NOT UPDATED AUTOMATICALLY |
Friday, March 24, 2023 | TEAS SECTION 8 & 9 RECEIVED |
Saturday, April 2, 2022 | COURTESY REMINDER - SEC. 8 (10-YR)/SEC. 9 E-MAILED |
Thursday, December 26, 2019 | NOTICE OF ACCEPTANCE OF SEC. 8 & 15 - E-MAILED |
Thursday, December 26, 2019 | REGISTERED - SEC. 8 (6-YR) ACCEPTED & SEC. 15 ACK. |
Thursday, December 19, 2019 | TEAS RESPONSE TO OFFICE ACTION-POST REG RECEIVED |
Sunday, August 25, 2019 | POST REGISTRATION ACTION MAILED - SEC. 8 & 15 |
Monday, August 19, 2019 | TEAS RESPONSE TO OFFICE ACTION-POST REG RECEIVED |
Sunday, August 18, 2019 | REVIEW OF CORRESPONDENCE COMPLETE - POWER OF ATTORNEY ENTERED |
Wednesday, August 14, 2019 | TEAS WITHDRAWAL OF ATTORNEY RECEIVED-FIRM RETAINS |
Monday, February 18, 2019 | POST REGISTRATION ACTION MAILED - SEC. 8 & 15 |
Monday, February 11, 2019 | CASE ASSIGNED TO POST REGISTRATION PARALEGAL |
Tuesday, January 29, 2019 | TEAS SECTION 8 & 15 RECEIVED |
Thursday, July 5, 2018 | ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED |
Thursday, July 5, 2018 | TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED |
Monday, June 25, 2018 | APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED |
Monday, June 25, 2018 | TEAS CHANGE OF OWNER ADDRESS RECEIVED |
Monday, April 2, 2018 | COURTESY REMINDER - SEC. 8 (6-YR) E-MAILED |
Tuesday, April 2, 2013 | REGISTERED-PRINCIPAL REGISTER |
Tuesday, January 15, 2013 | OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED |
Tuesday, January 15, 2013 | PUBLISHED FOR OPPOSITION |
Wednesday, December 26, 2012 | NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED |
Friday, December 7, 2012 | LAW OFFICE PUBLICATION REVIEW COMPLETED |
Tuesday, December 4, 2012 | APPROVED FOR PUB - PRINCIPAL REGISTER |
Tuesday, December 4, 2012 | EXAMINER'S AMENDMENT ENTERED |
Tuesday, December 4, 2012 | NOTIFICATION OF EXAMINERS AMENDMENT E-MAILED |
Tuesday, December 4, 2012 | EXAMINERS AMENDMENT E-MAILED |
Tuesday, December 4, 2012 | EXAMINERS AMENDMENT -WRITTEN |
Tuesday, November 20, 2012 | NOTIFICATION OF PRIORITY ACTION E-MAILED |
Tuesday, November 20, 2012 | PRIORITY ACTION E-MAILED |
Tuesday, November 20, 2012 | PRIORITY ACTION WRITTEN |
Friday, October 26, 2012 | TEAS/EMAIL CORRESPONDENCE ENTERED |
Friday, October 26, 2012 | CORRESPONDENCE RECEIVED IN LAW OFFICE |
Monday, October 15, 2012 | ASSIGNED TO LIE |
Tuesday, October 2, 2012 | TEAS RESPONSE TO OFFICE ACTION RECEIVED |
Monday, June 25, 2012 | NOTIFICATION OF NON-FINAL ACTION E-MAILED |
Monday, June 25, 2012 | NON-FINAL ACTION E-MAILED |
Monday, June 25, 2012 | NON-FINAL ACTION WRITTEN |
Saturday, June 23, 2012 | ASSIGNED TO EXAMINER |
Wednesday, March 28, 2012 | NOTICE OF PSEUDO MARK MAILED |
Tuesday, March 27, 2012 | NEW APPLICATION OFFICE SUPPLIED DATA ENTERED |
Wednesday, March 21, 2012 | NEW APPLICATION ENTERED |