IMPANDED PIPE Trademark

Trademark Overview


On Friday, March 6, 2009, a trademark application was filed for IMPANDED PIPE with the United States Patent and Trademark Office. The USPTO has given the IMPANDED PIPE trademark a serial number of 79070914. The federal status of this trademark filing is CANCELLED - SECTION 71 as of Friday, October 19, 2018. This trademark is owned by Eisenbau Krämer mbH. The IMPANDED PIPE trademark is filed in the Metal Products, Machinery Products, Construction & Repair Services, Treatment & Processing of Materials Services, and Computer & Software Services & Scientific Services categories with the following description:

Construction materials made of metal, namely, metal pipes for use as pipe lines in the oil, gas, and water industry; steel pipes for use offshore as tubulars, cans, legs, piles, bracings, conductors, risers and tethers; steel pipes for use in the construction industry for bridges, stadiums, and high-rises; steel pipes for use in steel structures under water as piles, dolphins, and anchor piles; metal machinery pipes for use in the paper industry as felt rolls, wire rolls, press rolls, dryers, reel spools, and winder drums; metal machinery pipes for use as hydraulic cylinders, cable drums, yarn rollers, rolls for weaving machinery, cardan shafts, and dryer rolls; pipes and tubes made of metal, namely, metal structural pipes for building construction; non-electrical metal conduits for energy and raw materials; metal pipes used in pressure vessels, except for machine parts

Parts for compressed-air tools used in construction engineering, namely, metal pipes; Parts of oilfield wellhead machines, namely, pipes made of metal

Installation of building insulation around metal pipes and tubes; construction consultancy

Exterior and interior treatment of the metal in pipes and tubes made of metal, namely, exterior and interior steel plating; treatment of materials by means of heat treatment of pipes and tubes made of metal

Technical planning of buildings; Technical research on building construction planning; technical project planning of pipe lines in the oil, gas, and water industry; technical project planning of Offshore pipes and under water structures; technical project planning of buildings, bridges, stadiums, and high-rises; technical project planning of machinery pipes for the paper industry; technical consultancy in relation to all of the above; engineering; calibrations; non-destructive material testing of pipes and tubes made of metal
impanded pipe

General Information


Serial Number79070914
Word MarkIMPANDED PIPE
Filing DateFriday, March 6, 2009
Status709 - CANCELLED - SECTION 71
Status DateFriday, October 19, 2018
Registration Number3778301
Registration DateTuesday, April 20, 2010
Mark Drawing4000 - Illustration: Drawing with word(s) / letter(s) / number(s) in Block form
Published for Opposition DateTuesday, February 2, 2010

Trademark Statements


Disclaimer with Predetermined Text"PIPE"
Goods and ServicesConstruction materials made of metal, namely, metal pipes for use as pipe lines in the oil, gas, and water industry; steel pipes for use offshore as tubulars, cans, legs, piles, bracings, conductors, risers and tethers; steel pipes for use in the construction industry for bridges, stadiums, and high-rises; steel pipes for use in steel structures under water as piles, dolphins, and anchor piles; metal machinery pipes for use in the paper industry as felt rolls, wire rolls, press rolls, dryers, reel spools, and winder drums; metal machinery pipes for use as hydraulic cylinders, cable drums, yarn rollers, rolls for weaving machinery, cardan shafts, and dryer rolls; pipes and tubes made of metal, namely, metal structural pipes for building construction; non-electrical metal conduits for energy and raw materials; metal pipes used in pressure vessels, except for machine parts
Goods and ServicesParts for compressed-air tools used in construction engineering, namely, metal pipes; Parts of oilfield wellhead machines, namely, pipes made of metal
Goods and ServicesInstallation of building insulation around metal pipes and tubes; construction consultancy
Goods and ServicesExterior and interior treatment of the metal in pipes and tubes made of metal, namely, exterior and interior steel plating; treatment of materials by means of heat treatment of pipes and tubes made of metal
Goods and ServicesTechnical planning of buildings; Technical research on building construction planning; technical project planning of pipe lines in the oil, gas, and water industry; technical project planning of Offshore pipes and under water structures; technical project planning of buildings, bridges, stadiums, and high-rises; technical project planning of machinery pipes for the paper industry; technical consultancy in relation to all of the above; engineering; calibrations; non-destructive material testing of pipes and tubes made of metal

Classification Information


International Class006 - Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; nonelectric cables and wires of common metal; ironmongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
US Class Codes002, 012, 013, 014, 023, 025, 050
Class Status CodeF - NOT AVAILABLE
Class Status DateFriday, October 19, 2018
Primary Code006
First Use Anywhere DateNOT AVAILABLE
First Use In Commerce DateNOT AVAILABLE

International Class007 - Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); agricultural implements other than hand-operated; incubators for eggs.
US Class Codes013, 019, 021, 023, 031, 034, 035
Class Status CodeF - NOT AVAILABLE
Class Status DateFriday, October 19, 2018
Primary Code007
First Use Anywhere DateNOT AVAILABLE
First Use In Commerce DateNOT AVAILABLE

International Class037 - Building construction; repair; installation services.
US Class Codes100, 103, 106
Class Status CodeF - NOT AVAILABLE
Class Status DateFriday, October 19, 2018
Primary Code037
First Use Anywhere DateNOT AVAILABLE
First Use In Commerce DateNOT AVAILABLE

International Class040 - Treatment of materials.
US Class Codes100, 103, 106
Class Status CodeF - NOT AVAILABLE
Class Status DateFriday, October 19, 2018
Primary Code040
First Use Anywhere DateNOT AVAILABLE
First Use In Commerce DateNOT AVAILABLE

International Class042 - Scientific and technological services and research and design relating thereto; industrial analysis and research services; design and development of computer hardware and software.
US Class Codes100, 101
Class Status CodeF - NOT AVAILABLE
Class Status DateFriday, October 19, 2018
Primary Code042
First Use Anywhere DateNOT AVAILABLE
First Use In Commerce DateNOT AVAILABLE

Trademark Owner History


Party NameEisenbau Krämer mbH
Party Type30 - Original Registrant
Legal Entity Type16 - Limited Liability Company
Address57223 Kreuztal
DE

Party NameEisenbau Krämer mbH
Party Type20 - Owner at Publication
Legal Entity Type16 - Limited Liability Company
Address57223 Kreuztal
DE

Party NameEisenbau Krämer mbH
Party Type10 - Original Applicant
Legal Entity Type16 - Limited Liability Company
Address57223 Kreuztal
DE

Trademark Events


Event DateEvent Description
Friday, September 17, 2021NEW REPRESENTATIVE AT IB RECEIVED
Friday, November 29, 2019TOTAL INVALIDATION PROCESSED BY THE IB
Wednesday, June 26, 2019TOTAL INVALIDATION OF REG EXT PROTECTION SENT TO IB
Wednesday, June 26, 2019INVALIDATION PROCESSED
Wednesday, June 19, 2019TOTAL INVALIDATION OF REG EXT PROTECTION CREATED
Thursday, March 21, 2019INTERNATIONAL REGISTRATION RENEWED
Friday, October 19, 2018CANCELLED SECTION 71
Monday, October 15, 2018CASE ASSIGNED TO POST REGISTRATION PARALEGAL
Tuesday, May 10, 2016POST REGISTRATION ACTION MAILED - SEC. 71 & 15
Tuesday, May 10, 2016CASE ASSIGNED TO POST REGISTRATION PARALEGAL
Friday, April 1, 2016TEAS SECTION 71 & 15 RECEIVED
Monday, April 20, 2015COURTESY REMINDER - SEC. 71 (6-YR) E-MAILED
Thursday, February 7, 2013FINAL DECISION TRANSACTION PROCESSED BY IB
Tuesday, May 29, 2012TEAS CHANGE OF CORRESPONDENCE RECEIVED
Friday, August 6, 2010FINAL DISPOSITION NOTICE SENT TO IB
Friday, August 6, 2010FINAL DISPOSITION PROCESSED
Tuesday, July 20, 2010FINAL DISPOSITION NOTICE CREATED, TO BE SENT TO IB
Tuesday, April 20, 2010REGISTERED-PRINCIPAL REGISTER
Tuesday, February 2, 2010PUBLISHED FOR OPPOSITION
Wednesday, January 13, 2010NOTICE OF PUBLICATION
Monday, December 28, 2009LAW OFFICE PUBLICATION REVIEW COMPLETED
Monday, December 28, 2009ASSIGNED TO LIE
Thursday, December 24, 2009APPROVED FOR PUB - PRINCIPAL REGISTER
Thursday, December 3, 2009TEAS/EMAIL CORRESPONDENCE ENTERED
Thursday, December 3, 2009CORRESPONDENCE RECEIVED IN LAW OFFICE
Thursday, December 3, 2009ASSIGNED TO LIE
Wednesday, November 18, 2009TEAS RESPONSE TO OFFICE ACTION RECEIVED
Tuesday, September 29, 2009REFUSAL PROCESSED BY IB
Thursday, August 27, 2009NON-FINAL ACTION MAILED - REFUSAL SENT TO IB
Thursday, August 27, 2009REFUSAL PROCESSED BY MPU
Tuesday, August 25, 2009NON-FINAL ACTION (IB REFUSAL) PREPARED FOR REVIEW
Monday, August 24, 2009NON-FINAL ACTION WRITTEN
Tuesday, August 18, 2009APPLICATION FILING RECEIPT MAILED
Friday, August 14, 2009ASSIGNED TO EXAMINER
Friday, August 14, 2009NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
Thursday, August 13, 2009SN ASSIGNED FOR SECT 66A APPL FROM IB